Summary
The layout is the section's internal arrangement: how many shelves, whether it has a drawer stack, whether it has a closet rod, and so on. Each section in the project is configured separately by picking a layout from the catalog and applying a material to it. The change is previewed in 3D below while you decide.
Steps
-
Select a layout. On the section screen you will see a grid with all the available layouts for the section type (Single or Double) and the measurements you set earlier. Press the card that best matches what the client wants. The grid scrolls: the Scroll to see more text reminds you there are more options below.
-
Choose the body material. When you select a layout, the Material carousel appears below with the available options (Espiga Sal, Lino Cancún, Tessuto Textil, etc.). Press the material card to apply it to every body piece. Above the carousel you have the Supplier filter to narrow the list to the manufacturer you usually work with.
-
Check the section width and move on. Next to the layout you will see the section width as a reminder: it is the one you defined in the initial configuration and it cannot be edited here (if you need to change it, go back to that step). When everything is complete —layout + material—, the Next button lights up. If there are several sections you move on to the next one; if it was the last, you go to the project summary.
Tips
- The layout changes the internal pieces (shelves, drawer stacks, shelving). The doors are independent and you choose them in the Extra Options step.
- The supplier filter groups by the exact
supplierstring, so Finsa and finsa would show as two different suppliers. - The Metal material does not appear in the carousel: it is a system material (closet rods) applied automatically, never by hand.